Placepoint 3.0.36
Released on 16/11/2026. 39 new map layers are ready in Fusion, and 38 of them show the sea, weather, fishing and fish farming. Placepoint AI answers questions about lice counts, ship traffic, waves and aquaculture applications. You can draw roofs in 3D-Designer on any footprint, you can connect the Agent to Rydoo, and a locked feature shows which licence level unlocks it.
New
Map layers in Fusion and Placepoint AI
39 new map layers are ready in Fusion. The 38 about the sea, weather, fishing and fish farming are also in Placepoint AI, which now has far more marine data after the update of 16/11/2026. Four new suppliers are included: BarentsWatch, Kystverket (the Norwegian Coastal Administration), Havforskningsinstituttet (the Norwegian Institute of Marine Research) and SEAPOP.
Under Coast and fishing:
- Fish health: ILA and PD zones shows the zones that Mattilsynet (the Norwegian Food Safety Authority) has set up against the fish diseases ILA and PD, and sites in the Aquaculture register with ongoing outbreaks. The layer has 13 sub-layers, with history. From BarentsWatch.
- Fishing activity and gear at sea shows fixed gear that is out now, and passive gear reported to Kystvakten (the Norwegian Coast Guard) since 1999: nets, pots, longlines and purse seines. From BarentsWatch.
- Fishing activity by gear shows where fishing takes place, based on vessel positions since 2011, for each gear type: bottom trawl, pelagic trawl, nets, longline and hook, seine, Danish seine and pots. From Fiskeridirektoratet (the Norwegian Directorate of Fisheries).
- Sea traffic, pilotage and emergency preparedness shows compulsory pilotage, pilot boarding areas, traffic separation schemes, recommended routes, speed limits at sea, ports of refuge and emergency equipment depots. From Kystverket.
- Ship traffic, density shows where ship traffic runs close to the coast, in 50 m grid cells. From Kystverket.
- Sea depth from nautical charts shows depth at sea as depth areas, depth contours, shoals, drying areas and areas that have not been surveyed, from the nautical charts of Kartverket. The layer adds to Sea depth (bathymetry).
- Depth contours in ocean areas shows depth contours and depth points offshore. From Kartverket.
Statistics and forecasts for the sea and weather, also under Coast and fishing:
- Wave height, eight map layers: mean and maximum for the year and per month, the annual maximum year by year, and the 50-year and 100-year wave, which is used when a facility is designed. From Meteorologisk institutt (MET) (the Norwegian Meteorological Institute), like all the statistics layers below.
- Wind, seven map layers: mean wind for the year and per month, the wind expected every 20, 30, 50 and 100 years, and the number of hours with strong and weak wind.
- Wind gusts, three map layers: mean for the year and per month, and the number of hours with strong and weak gusts.
- Air temperature, two map layers: mean for the year and per month.
- Sea temperature, two map layers: statistics for the year and per month.
- Current and sea temperature, two map layers: statistics for the years 2012 to 2024, and a forecast that is updated daily.
- Wave forecast shows the wave height in the latest forecast, the forecast points along the coast and areas with crossing seas. From BarentsWatch.
- Ice charts shows ice concentration and the ice edge in the latest ice chart, mostly in the Barents Sea and around Svalbard. From BarentsWatch.
- Ocean current by depth shows the average current at nine depths from the surface to 250 m, and the main currents in the Barents Sea and the North Atlantic. From Havforskningsinstituttet.
The statistics for waves, wind and air temperature are based on the years 1991 to 2020, in a grid of about 3 km.
Under Nature:
- Distribution of marine species shows where 79 species and stocks live, from lobster and edible crab to seals and whales. From Havforskningsinstituttet.
- Seabirds at sea by season shows the distribution of seabirds offshore by season, in 36 sub-layers. From SEAPOP.
- Vulnerable habitats on the seabed (MAREANO) shows coral forests, sponge communities, sea pen fields and observed vulnerable benthic animals. From MAREANO, run by Havforskningsinstituttet, Norges geologiske undersøkelse (NGU) (the Geological Survey of Norway) and Kartverket.
- Litter, trawl marks and vulnerable biotopes on the seabed (MAREANO) shows where MAREANO has observed litter and trawl marks, and the coverage for vulnerable biotopes.
Under Zoning:
- Regulation plan proposals (Oslo) shows each plan proposal under review by Oslo kommune: detailed zoning plans and area zoning plans. Click a proposal to see the plan type, case number and a link to the case at Plan- og bygningsetaten (the Oslo planning and building agency). The layer adds to the nationwide Regulation plan proposals, and adopted plans are in Regulatory Plans (Oslo).
3D-Designer
- You can now draw roofs in 3D-Designer on any footprint, not only rectangles, and building lines can get roofs that follow every bend. To get started, see Draw buildings.
- On a terrain line that follows the points in 3D-Designer, each segment now shows its slope. You can click a segment and enter a new value as a percentage, in degrees or as a ratio.
- When you hover over an item in the drawing list in 3D-Designer, it lights up on the map, and the other way round. This now applies to all drawing tools, including wall, building and terrace.
- The terrain in 3D-Designer is no longer rebuilt when you only select or leave a terrain area without editing it, so the view flickers less.
The tools used on a single plot are described in Feasibility study, and answers to common questions are in 3D and visualisation.
Agent
- The Rydoo connection in the Agent is open to everyone, now that Rydoo has approved our domains. An administrator adds it under Settings. See How to add a connection.
All connections, and what each of them needs, are listed in Connect the Agent to other systems. What the Agent uses them for is described under Connections to other systems, and troubleshooting under When the connection does not work.
Licence
- When a feature is locked for your licence, Placepoint Fusion shows which level unlocks it and what else that level includes. You can request an upgrade directly from the dialogue. The levels are listed on the pricing page at placepoint.no.
Account and login
- You accept the terms of use when you create an account or log in to Placepoint Fusion. The privacy policy and the security page are linked from the same place. Read more about login and privacy in Account and login and Privacy and data processing.
Fixes and improvements
- The circle and rectangle tools in the drawing tools work again, after they had stopped starting the drawing.
- The map in the 3D view in 3D-Designer stays still when you open or close a panel, instead of jumping.
- A map layer you do not have access to is explained in the panel instead of showing an error, and WMS map layers show the supplier's legend.
- The Tenant tab shows the tenants of Swedish properties, and public cases and type codes no longer fail for them. Land register, 1881, Proff, Allabolag and credit checks now follow the country the property or company belongs to.
- The filter panel explains a filter type that is not available instead of showing an error, a building that does not exist shows as not found, and key figures for Swedish companies are shown in SEK.
- When a connection to a supplier in the Agent fails, the settings now explain whether the error is with the supplier or with us, or whether the connection needs to be restarted, with the supplier's own error message as detail. See When the connection does not work.
- Swedish outbuildings, garages and other ancillary buildings now show as Ancillary building, and no longer count as residential buildings when the property's use is calculated.
- The map buttons in the top right of the map interface appear again on touchscreen PCs, without you having to scroll sideways.
- Daytime population in the demography map layers and the grid now counts everyone who works in the area, including those who live in the same municipality. The grid also shows the number of employees and employed residents when you point at a cell.
- On Swedish properties, the energy tab is now called Energideklarationer (Swedish energy performance certificates), and the zoning tab shows a clear empty state instead of a blank area.
Other news since 3.0.35
Placepoint AI
- Placepoint AI answers questions about fish farming, fishing and the coast: lice counts and disease for each site, ship traffic, waves, currents and tides, depth and species. 50 new map services with 314 map layers are included. Everything is listed in the update of 16/11/2026.
- You can search all aquaculture applications since February 2023, see who rejects them and how long processing takes, and get a preliminary assessment of a location for a new facility.
- Logging in to Placepoint AI from Claude Code now works for everyone, with a clearer page that shows it is Claude asking for access. Read more in the update of 12/11/2026.
- Large exports to Excel no longer stop with an error, and searches for shops with long lists of chains now go through as one combined answer. See the update of 12/11/2026.
- The ownership structure section of a company report no longer fails when owners have no organisation number, and maps of a property are drawn even when the AI sends its own map extent. See the update of 12/11/2026.



