Skip to main content

100-year wave

A 100-year wave is a rare, high sea wave that occurs on average once every 100 years. It is used to measure how extreme the sea can get at a location, and so what a structure in the sea must withstand.

The figure is based on the concept of a return period. A return period tells you how often an event of a given size occurs on average. An event with a return period of 100 years does not happen exactly every 100 years: the time between two such events varies from one time to the next. The probability that it occurs in a given year is one divided by the return period, so 1% for a 100-year wave. The 100-year wave is calculated from observed wave data together with statistical assumptions. Store norske leksikon (a Norwegian encyclopedia) gives around 28 to 32 metres on the Norwegian continental shelf.

An example from Store norske leksikon shows how unevenly the return period plays out. In the encyclopedia's example of a 10-year value for daily precipitation at Blindern, the time between events can be 15, 10, 10, 9, 5, 8, 20, 2, 16 and 11 years, an average of about ten years. The same applies to a return period of 100 years.

The figure refers to the largest wave height you can expect, not significant wave height, which is an average of the highest waves. Global warming will in time affect the statistical data that the calculations are based on.

When designing petroleum platforms and similar structures, it is often required that they can withstand the 100-year wave. For aquaculture facilities at sea, the requirement is different. It is set out in NYTEK, the regulation on technical standards for aquaculture facilities for fish in the sea, lakes and watercourses, which applies from 01/01/2023. Under § 11, environmental loads used in design against structural failure must have a return period of at least 50 years. So a 50-year value is the minimum requirement, and “at least” allows for a longer return period. The load must be set based on the environmental conditions at the site, and the site survey under § 9 covers waves, currents, wind and tides, among other things. The regulation states that the requirements can normally be met by using the standard NS 9415:2021. NYTEK23 repealed the NYTEK regulation from 2011, and holders could choose between the two regulations until 01/01/2024. Under § 12, stricter control, reliability class three, also applies to main components at sites where significant wave height can exceed five metres in a sea state with a return period of 50 years or more.

Waves that hit fixed structures create forces that are important to take into account. In building engineering, a return period of 50 years is usually assumed for variable loads.

The value depends on the location, and the Norwegian Meteorological Institute (MET) is behind the statistics for waves, wind and currents.

In Placepoint AI you can ask for wave statistics for a location: the 50-year and 100-year wave, annual maximum and monthly statistics. The values are modelled and do not replace the site survey that NYTEK requires. See the update of 16/11/2026.

How the dataset appears in the map​

The dataset is part of the map layer Coast and fishing as Wave height, 100-year value:

100-year wave in Placepoint

From Placepoint's dictionary: 100-year wave

More information: Store norske leksikon: the 100-year wave, Store norske leksikon: return values, Lovdata: NYTEK23

English: 100-year wave (the wave height with a 100-year return period).

Frequently asked questions​

Does a 100-year wave mean it only comes once every 100 years?​

No. It is an average. The probability is 1% every year, and the time between two such waves varies from one time to the next. This is explained by Store norske leksikon: return values.

What is the difference between the 50-year wave and the 100-year wave?​

The return period. The 50-year wave is the height you can expect on average once every 50 years, and it is lower than the 100-year wave. NYTEK requires a return period of at least 50 years for environmental loads in design against structural failure.

Must a fish farm withstand a 100-year wave?​

Not according to the wording of NYTEK23: § 11 sets the return period at at least 50 years, and “at least” allows for a longer one. The site survey must document the wave conditions at the location.

How do I find wave statistics for a location?​

Ask Placepoint AI for the 50-year and 100-year wave at the location. The statistics for waves, wind and currents come from the Norwegian Meteorological Institute (MET).

What distinguishes the 100-year wave from a rogue wave?​

The rogue wave is a single wave that is twice as high as the significant wave height. The 100-year wave is a statistical extreme value for a location.

These pages are generated automatically and may contain errors.This applies to screenshots and videos in particular. See About these help pages. Let us know through "Did you find what you were looking for?" at the bottom of the page, the chat at bottom right or support@placepoint.no.