Significant wave height
Significant wave height is the average of the highest third of the waves. It is the figure most often given when describing how rough the sea is.
Waves at sea are irregular. Wind sea is made up of many wave trains with different periods and heights, so it has to be described statistically. This is why one figure is given for the sea state, rather than a height for each wave. Wave height is the vertical distance from the trough to the crest.
This means the highest single wave is not the same as the significant wave height. The maximum wave height can be much greater, and occurs when two or more waves combine. A wave twice as high as the significant wave height is classed as a rogue wave. With a significant wave height of five metres, you can meet single waves of ten metres. The Draupner wave, which hit an oil platform in the North Sea, was about 25 metres.
Wind sea is waves that are still in the area where the wind is acting, and it is very irregular. When the waves move out of the wind's area, they turn into regular swell. Swell can travel long distances, although it eventually becomes so low that it is hard to see, and the wavelength can be several hundred metres. When swell reaches shallower water, the wavelength decreases while the height increases, and the wave can finally break. Waves that hit fixed structures cause both periodic pressure forces and short impacts from breaking waves. Calculating these forces is complex, but important to take into account for structures at sea.
Forecasts and measurements come from several sources. The Norwegian Meteorological Institute (MET) is responsible for monitoring and forecasting waves, and its models give daily forecasts of wave height and wave direction that anyone can use freely. BarentsWatch shows wave heights along the whole Norwegian coast in its Bølgevarsel (wave forecast) service. Measurements are taken with buoys that send signals wirelessly to shore, and with instruments on the seabed that record water pressure, among other methods. Statistics for waves, wind and currents over many years also come from MET.
If you plan or run an operation at sea, significant wave height is one of the first figures to check. It tells you how exposed an aquaculture site is, and what installations and moorings must withstand. In NYTEK the figure is a threshold: checks of design and construction follow stricter requirements, reliability class three, for main components at a site where significant wave height can exceed five metres in a sea state with a return period of 50 years or more (section 12 of the regulations). How often a given height can be expected is explained under 100-year wave.
In Placepoint AI you can ask for a wave forecast for a location and for wave statistics, including the 50-year and 100-year wave, annual maximum and monthly statistics. The values are modelled and do not replace the site survey that NYTEK requires. See the update of 16/11/2026.
How the dataset appears in the map
The dataset is part of the map layer Coast and fishing as Bølgevarsel (wave forecast):

From Placepoint's dictionary: Significant wave height
More information: Store norske leksikon: ocean waves, Store norske leksikon: rogue waves, MET: Our work in the ocean areas
English: Significant wave height.
Frequently asked questions
What does it mean that the significant wave height is three metres?
The average of the highest third of the waves is three metres. Many waves are lower, and some are higher. The highest single wave can be much greater, and a rogue wave is twice as high as the significant wave height.
Is significant wave height the highest wave?
No. It is an average of the highest waves, not the peak. The maximum wave height can be much greater, because several waves sometimes combine.
Who makes wave forecasts for the Norwegian coast?
The Norwegian Meteorological Institute (MET) is responsible for forecasting waves. BarentsWatch shows wave heights along the whole coast in Bølgevarsel, with NORCE and MET as data sources.
Why does the figure matter for fish farming?
NYTEK links the requirements for checks of design and construction to significant wave height in a sea state with a return period of 50 years or more. Where significant wave height can exceed 5 metres in a sea state with a return period of 50 years or more, reliability class three applies to checks of the main components.
What is the difference between significant wave height and the 100-year wave?
Significant wave height describes the sea in a specific situation. The 100-year wave is an extreme value: the height you can expect on average once every hundred years.



